Aircommand IBIS ROOFTOP CARAVAN Especificaciones

IBIS OWNERS MANUAL - INSTALLATION - COMMISSIONING OF UNIT - SPECIFICATIONS - OPERATING INSTRUCTIONS

8. ATTACH DUCT TO UNIT - Raise the brace assembly and slip the black plastic duct over the outside diameter of the outlet underneath t

9. ATTACH PLENUM COVER - Secure the main plenum cover to the duct assembly with the 4 screws provided (Fig 16). TIP: It is important

COMMISSIONING OF THE UNIT 1. Turn the power on at the circuit breaker 2. Press the ON/OFF button and press the MODE button to select FAN

GENERAL SPECIFICATIONS Air – Conditioner Height - 220mm Width - 825mm Length - 1040mm Weight - 44kg Air Discharge Plenum He

OPERATING INSTRUCTIONS - Turn the unit on by pressing the ON/OFF button once. - Press the MODE button to cycle through options Cool, Dry, He

WARRANTY OF REFRIGERATED AIRCONDITIONING Warranty within Australia We undertake by this warranty to rectify, free of charge, at our nearest aut

HEAD OFFICE Aircommand Australia Pty Ltd 954-956 Port Road Albert Park, SA 5014 ACN 007 592 239 For warranty claims, sales enquires or cus

GENERAL IBIS UNIT INFORMATION I. PURPOSE The Aircommand IBIS air conditioning unit is designed for installation on the roof of a caravan or recreation

INSTALLATION PARTS LIST MAIN COMPONENTS 1) IBIS MkII Rooftop Airconditioner 2) Roof Seal Gasket 3) Black Plastic Duct 4) Brace Assembly 5) Pl

1. INSTALLATION POSITION Fig 1: IBIS Vent clearances Before beginning, mark out the position of the unit considering the

2. ASSESS ROOF STRENGTH - The roof members MUST be strong enough to support the weight of the unit (up to 50kg) without any roof deflection that

4. POSITION IBIS ON ROOF - Remove the air conditioner from the carton. - Position the unit over the gasket so that the corners of the squa

6. ASSESS ROOF THICKNESS - Measure the roof thickness and consult the table across to check if adjustments to the hold down bolt and duct len